Why Xbox Series S or Series X Won’t Turn on? Get Solutions

Xbox Series X, Series S

The Xbox series X and series S is a well-known entertainment console, but just like various technology, it optionally has some issues such as it refuses to turn on. Unlike the other Xbox models it can be due to other root causes, and from it, many can be fixed by performing some of the effective workarounds.

When an Xbox series X, series S won’t turn on, the easiest to speak reason can be an issue with software, or hardware issue, or a firmware issue. If it is hardware-related, it’s better to hand to expertise. Whereas most other problems like power, firmware, or software can be fixed by yourself. So continue to read this article as it may help you to fix the issue.

How to Fix an Xbox series X, series S That Won’t Turn On

Solution 1: Unplug the AC Power

Firstly detach the power from Xbox Series S or X and press the power button until it completely turns off, then unplugs the power cable. For a while unplugged the cable for a minimum of 30-40 seconds. Later on, plug it and verify if still the issue is fixed or not.

Solution 2: Power Cycle Xbox Console

Power cycle your Xbox series S, and X which is quite similar to the first steps but more powerful compared to it. Press the Power Button to ensure the console is turned off. Now unplug the console from main power for 30 seconds. Lastly, plug it back in and verify the problem.

Solution 3: Check the Switch Board

Verify the power outlet is working. For that plug the electronic bulb into the power outlet. And if it works then there is no issue with the power outlet. Now just simply plug the console into another power outlet and see if it works. If not then take the console to expertise.

Solution 4: Try Alternate Cable

Use another power cable. Same as another electronic device the Xbox comes with internal power supplies, so if you have a similar power cable, and use it instead of the original power cable. if it works, you’ve just found the culprit!

Solution 5: Try Cleaning Console

Simply clean all the inside console. With the help of a blower clean out all the dust present in the console. After cleaning the console completely, verify the issue.

Solution 6: Check for Damage

Hold the Guide Key on the synced controller. If this synced controller works, enable the console by pressing the guide key. Now if the console easily works then the culprit is the power button. For that check, if your warranty card is still valid.

Solution 7: Contact Support

Still, if the Xbox won’t turn on, the only option left for you is to contact the Support team and elaborate on the problem. They will surely look at the issue and try to fix it.

More Posts,

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
Xbox Series X, Series S

How to Setup VPN on Xbox Series S and Series X

Next Post
Xbox Series X, Series S

How to Stream Videos from iPhone, Android to Xbox Console