Samsung S10 screen burn-in issue could go vigorous if you don’t take care of it. Normally after using 3 to 4 months users begins to report screen burn-in issues on Samsung. If you are the one with the same problem, then there is nothing to worry about it. From earlier Galaxy phones, people are facing such dramatic behavior and fixing it. In this article, we have shown you some of the finest tricks that will help you fix S10 screen burn-in issues within no moment.
Alongside, make sure to try the following tips, mentioned below. These pro tips are very useful to avoid screen burn-in as well as to improve the battery life of the Samsung S10.
Fix Samsung Galaxy S10 Screen burn-in issues
- Try to use your device to minimum brightness level as higher the brightness the battery consumption will also increase which simply reduces the life span of the battery.
- Disable Auto-Brightness feature.
- Set the screen timeout to 15seconds.
- Keep the device turned off when not in use.
- Use dark wallpapers to avoid high battery consumption. Don’t use Live Wallpapers.
- Do not expose the device directly into the sunlight. You can use the phone in sunlight but try to avoid it as far as possible.
- Make sure to remove accessories while you put the Galaxy S10 in charge.
- For a few days, don’t play high-end games on the phone.
- One of the users said, to use YouTube in full screen if you are using continuously.
These are a couple of few tricks but if they didn’t work, then continue to read the following leads.
Tip 1: Enable Safe Mode
One of the most common reasons behind screen burn-in issues on S10 is rogue apps. Sometimes the third-party applications are responsible behind heating and battery draining issues of our devices. However, to confirm the real problem, we would suggest you put the S10 in Safe mode. Safe mode will disable all third-party applications and keep the system apps.
- Shut down the device.
- Press and hold the Power button until the SAMSUNG logo appears.
- Immediately, hold the Volume down button after releasing the Power button.
- Don’t release the Volume down button until the device restarts and Safe Mode appears on the bottom of the screen.
Tip 2: Wipe Cache Partition
Still unable to fix Screen burn issues on Galaxy S10, don’t worry carry on with this trick and try to fix screen burn on S10. How about unloading your device from extra files? That can be done by removing the cache files stored in the phone. There is no need to worry because we are talking about deleting the temporary data of S10. Here’s how to do it,
- Shut down the phone.
- Press and hold the Bixby button, Volume Up button and then hold down the Power button.
- Release all the buttons when you see the Android logo on the screen.
- Wait for 30-60 seconds, recovery options will appear.
- Use the Volume buttons, to navigate through the options.
- Select Wipe cache partition using the Power button.
- Again use the Volume button and confirm the action by selecting ‘Yes’ using the Power button.
- When the whole procedure is completed, the Reboot system now will appear, use the Power button and restart the phone.
Tip 3: Factory Reset Device
The previous trick was to remove the temporary files, whereas the factory data reset will delete all the installed applications and data. However, before doing so, don’t forget to take backup otherwise you won’t be able to revert the action.
- Settings > General management > Reset > Factory data reset > Reset > Delete all.
Tip 4: Contact Customer Support
Still, if the S10 screen burn-in issue continues then you should immediately contact the Samsung support. The problem is arising due to a hardware defect, which can only be fixed by the technical team.